Lediga job som Högskoleingenjör

Vill du påverka och göra skillnad på riktigt? Här bidrar du till att skapa trygghet för människor och samhällen. Det du gör spelar roll.

Sektionen för explosivämnesteknik bedriver utveckling, provning och analys inom områdena explosivämnesteknik och pyroteknik. Det som kännetecknar sektionen är den stora variationen i arbetsuppgifter och produkter. Som utvecklingsingenjör får du möjlighet att arbeta med flera olika projekt och produkter samtidigt, vilket ger en bred teknisk utveckling och en varierad vardag.

I rollen kommer du att delta i utvecklingsprojekt och ansvara för planering, genomförande och utvärdering av provning inom explosivämnesteknik. Arbetet innebär en kombination av experimentell verksamhet, mätteknik och analys av fysikaliska förlopp. Arbetet sker både självständigt och i nära samarbete med kollegor från olika teknikområden.

Tillsammans planerar, prioriterar och fördelar vi arbetet utifrån verksamhetens behov och varandras kompetenser. Därför söker vi dig som uppskattar samarbete, kunskapsutbyte och att bidra till gruppens gemensamma resultat.

Exempel på arbetsuppgifter:

• Planera och genomföra skjutprov med Carl-Gustaf- och AT4-projektiler, inklusive instrumentering av riggar för mätning av inneballistiska förlopp
• Utföra diagnostik av upptändnings- och förbränningsförlopp i krut med hjälp av höghastighetskameror och avancerad datainsamling
• Designa och genomföra experiment i tryckbomber och raketmotorer för att karakterisera tryck- och temperaturutveckling över tid
• Arbeta med detonativa och känslighetsrelaterade provningar, inklusive analys av initieringsförlopp och säkerhetskritiska egenskaper
• Implementera och använda avancerade mättekniker såsom spektroskopi, höghastighetssampling och specialiserade givarsystem för att samla in och tolka experimentdata

Som person är du initiativtagande, nyfiken och lösningsorienterad. Du trivs i en miljö där du får ta ansvar för dina arbetsuppgifter samtidigt som du arbetar nära andra för att nå gemensamma mål. Du har ett intresse för fysik, experimentell verksamhet och teknisk problemlösning och tycker om att omsätta teoretiska kunskaper i praktiken.

Vi tror att du uppskattar att arbeta i team och ser värdet av att dela med dig av kunskap, stötta kollegor och bidra till gruppens utveckling. För att lyckas i rollen behöver du ha god samarbetsförmåga och kunna kommunicera tydligt med personer från olika delar av verksamheten.

Vi tror att du har:

• Ingenjörsexamen, exempelvis inom teknisk fysik, eller utbildning/erfarenhet inom teknikområdet som bedöms likvärdig
• God kommunikationsförmåga i tal och skrift på svenska och engelska

Meriterande:

• Erfarenhet av arbete med explosivämnen
• Erfarenhet av provningsverksamhet eller laboratoriearbete
• Erfarenhet inom mätteknik eller experimentell fysik

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Vänligen observera att vi arbetar med löpande urval och att tjänsten kan komma att tillsättas innan sista ansökningsdatum har gått ut.

Upptäck oändliga möjligheter. Anta utmaningar, skapa smarta innovationer och uppgradera dina förmågor. Det här är en plats för kluriga tänkare, modiga pionjärer och alla däremellan. Tillsammans uppnår vi det extraordinära, var och en tar med sitt unika perspektiv. Varje bidrag räknas.

Saab är ett ledande försvars- och säkerhetsföretag med syfte att hjälpa nationer att skydda sin befolkning och bidra till trygghet för människor och samhällen. Med 28 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga.

Vill du påverka och göra skillnad på riktigt? Här bidrar du till att skapa trygghet för människor och samhällen. Det du gör spelar roll.

Sektionen för explosivämnesteknik bedriver utveckling, provning och analys inom områdena explosivämnesteknik och pyroteknik. Det som kännetecknar sektionen är den stora variationen i arbetsuppgifter och produkter. Som utvecklingsingenjör får du möjlighet att arbeta med flera olika projekt och produkter samtidigt, vilket ger en bred teknisk utveckling och en varierad vardag.

I rollen kommer du att delta i utvecklingsprojekt och ansvara för planering, genomförande och utvärdering av provning inom explosivämnesteknik. Arbetet innebär en kombination av experimentell verksamhet, mätteknik och analys av fysikaliska förlopp. Arbetet sker både självständigt och i nära samarbete med kollegor från olika teknikområden.

Tillsammans planerar, prioriterar och fördelar vi arbetet utifrån verksamhetens behov och varandras kompetenser. Därför söker vi dig som uppskattar samarbete, kunskapsutbyte och att bidra till gruppens gemensamma resultat.

Exempel på arbetsuppgifter:

• Planera och genomföra skjutprov med Carl-Gustaf- och AT4-projektiler, inklusive instrumentering av riggar för mätning av inneballistiska förlopp
• Utföra diagnostik av upptändnings- och förbränningsförlopp i krut med hjälp av höghastighetskameror och avancerad datainsamling
• Designa och genomföra experiment i tryckbomber och raketmotorer för att karakterisera tryck- och temperaturutveckling över tid
• Arbeta med detonativa och känslighetsrelaterade provningar, inklusive analys av initieringsförlopp och säkerhetskritiska egenskaper
• Implementera och använda avancerade mättekniker såsom spektroskopi, höghastighetssampling och specialiserade givarsystem för att samla in och tolka experimentdata

Som person är du initiativtagande, nyfiken och lösningsorienterad. Du trivs i en miljö där du får ta ansvar för dina arbetsuppgifter samtidigt som du arbetar nära andra för att nå gemensamma mål. Du har ett intresse för fysik, experimentell verksamhet och teknisk problemlösning och tycker om att omsätta teoretiska kunskaper i praktiken.

Vi tror att du uppskattar att arbeta i team och ser värdet av att dela med dig av kunskap, stötta kollegor och bidra till gruppens utveckling. För att lyckas i rollen behöver du ha god samarbetsförmåga och kunna kommunicera tydligt med personer från olika delar av verksamheten.

Vi tror att du har:

• Ingenjörsexamen, exempelvis inom teknisk fysik, eller utbildning/erfarenhet inom teknikområdet som bedöms likvärdig
• God kommunikationsförmåga i tal och skrift på svenska och engelska

Meriterande:

• Erfarenhet av arbete med explosivämnen
• Erfarenhet av provningsverksamhet eller laboratoriearbete
• Erfarenhet inom mätteknik eller experimentell fysik

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Vänligen observera att vi arbetar med löpande urval och att tjänsten kan komma att tillsättas innan sista ansökningsdatum har gått ut.

Upptäck oändliga möjligheter. Anta utmaningar, skapa smarta innovationer och uppgradera dina förmågor. Det här är en plats för kluriga tänkare, modiga pionjärer och alla däremellan. Tillsammans uppnår vi det extraordinära, var och en tar med sitt unika perspektiv. Varje bidrag räknas.

Saab är ett ledande försvars- och säkerhetsföretag med syfte att hjälpa nationer att skydda sin befolkning och bidra till trygghet för människor och samhällen. Med 28 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

ConScience AB is a dynamic and innovative company advancing superconducting quantum devices and technologies. We are looking for a Quantum Measurement Engineer to join our growing team and play a key role in the characterization and continued development of our superconducting quantum devices.

About the Role:

As a Quantum Measurement Engineer at ConScience, you will take an active, hands-on role in the experimental characterization of superconducting quantum devices. You will set up and conduct measurements, analyze experimental data, and translate results into insights about device performance. A key part of the role is independently planning, performing, and troubleshooting experiments while developing reliable and reproducible measurement and analysis workflows. At the same time, you will work closely with our interdisciplinary team of scientists and engineers to deliver high-quality results for R&D and commercial projects.

What You’ll Do:

• Set up, conduct, troubleshoot, analyze, and interpret experimental measurements of superconducting quantum devices

• Characterize and calibrate quantum devices and circuits and evaluate key device-performance parameters

• Develop and improve measurement protocols and experimental methods for device characterization

• Develop scientific software, measurement, and data-analysis workflows

• Analyze experimental data, identify trends and sources of error

• Prepare and handle samples, including mounting and basic hardware assembly

• Contribute to reliable and reproducible measurement procedures and laboratory workflows

• Document experimental methods, results, and conclusions clearly

• Collaborate closely with the team and communicate technical results to colleagues, collaborators, and clients

What We’re Looking For:

We are looking for someone who enjoys experimental problem-solving and is comfortable moving between hands-on laboratory work, data analysis, and scientific programming.

Required qualifications:

• MSc in physics, applied physics, electrical engineering, computer science, quantum engineering, nanotechnology, or another relevant STEM field

• Hands-on experience independently setting up, conducting, troubleshooting, and interpreting experimental measurements

• Experience with scientific programming and data analysis

• Comfortable with practical laboratory work, including sample handling, mounting, and basic hardware assembly

• Ability to work independently while collaborating effectively in an interdisciplinary team

• Good written and spoken English

Meritorious Qualifications:

You do not need to have experience in all of the areas below. Experience in one or more is considered an advantage:

• Superconducting qubits, Josephson-junction devices, or other cryogenic quantum devices

• Qubit characterization and calibration

• Two-qubit gate calibration and characterization

• Multi-qubit devices or larger superconducting quantum circuits and architectures

• Dilution refrigerators and cryogenic measurement setups

• RF/microwave measurements and instrumentation

• Automated experimental measurement and data-analysis workflows

• Design of superconducting qubits or other superconducting circuits

• RF/microwave device packaging and integration

• Noise, decoherence, and crosstalk in superconducting quantum devices

Why Join Us?

At ConScience AB, you will be part of an ambitious, passionate, and diverse team advancing superconducting quantum technology. We offer a flexible, collaborative, and intellectually stimulating environment where ideas, initiative, and practical problem-solving are valued, and where you will have with the opportunity to make a meaningful impact across both quantum science and industry.

Ready to help characterize the next generation of quantum devices?

How to Apply

Please submit:

1. Your CV

2. A short motivation letter (maximum two A4 pages) describing your interest in the

position and your motivation for joining ConScience

3. Contact details for at least two references

Applications will be reviewed on a rolling basis.

Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.