Produktionsingenjör - Lediga jobb

Som produktionsingenjör hos Team Tejbrant får du en central roll i utvecklingen av framtidens produktion. Du arbetar i gränslandet mellan produktion, teknik, inköp och IT med uppdraget att skapa effektiva, tydliga och hållbara produktionsprocesser.

Rollen kombinerar produktionsteknik, Lean, processutveckling och digitalisering. Genom att analysera produktionsflöden, utveckla arbetssätt och säkerställa att företagets digitala system stödjer verksamhetens processer bidrar du direkt till ökad produktivitet, kvalitet och leveransförmåga.

Du arbetar nära både produktionens medarbetare och företagets övriga funktioner och får stora möjligheter att påverka hur Team Tejbrants produktion utvecklas framåt.

I rollen ansvarar du för att driva och koordinera kontinuerligt förbättringsarbete inom produktionen i Hultsfred. Du analyserar produktionsflöden för att identifiera flaskhalsar, effektiviseringsmöjligheter och arbetsmoment som kan förenklas eller förbättras.

En central del av rollen är också att utveckla företagets processer och digitala arbetssätt samt säkerställa att ERP-systemet stödjer verksamhetens processer på ett effektivt sätt.

• Driva och koordinera förbättringsarbete och Kaizen-aktiviteter samt arbeta med Lean-metoder såsom 5S, värdeflödesanalys, standardiserat arbete och visuell styrning.

• Analysera produktions- och materialflöden, produktionsplanering, kapacitet och ledtider för att identifiera förbättringsmöjligheter.

• Kartlägga, dokumentera och utveckla produktions- och verksamhetsprocesser samt skapa tydliga och standardiserade arbetssätt, arbetsinstruktioner och processbeskrivningar.

• Identifiera gränssnitt mellan olika funktioner och förbättra informationsflödet genom hela verksamheten – från försäljning och order via planering, inköp, lager och produktion till leverans.

• Vara verksamhetens kontaktperson och kravställare i utvecklingen av ERP-systemet samt utveckla och standardisera arbetssätt i systemet.

• Säkerställa kvalitet i masterdata, parametrar och systemstrukturer samt identifiera manuella arbetsmoment som kan förenklas, automatiseras eller digitaliseras.

• Driva mindre system- och förbättringsprojekt och fungera som länk mellan verksamheten, interna IT-resurser och externa systemleverantörer.

• Ta fram relevanta KPI:er och utveckla datadriven uppföljning av exempelvis produktivitet, kapacitet, ledtider och leveransprecision.

Vi söker dig som har en teknisk utbildningsbakgrund, gärna som högskoleingenjör inom produktion, logistik, industriell ekonomi eller motsvarande. Alternativt har du genom flera års arbete inom tillverkande industri byggt upp motsvarande kompetens.

Du har erfarenhet av produktionsteknik, processutveckling eller kontinuerligt förbättringsarbete och en god förståelse för Lean-principer och hur dessa omsätts i praktiken.

För att lyckas i rollen behöver du också ha god systemförståelse och erfarenhet av ERP-system i en tillverkande verksamhet. Du behöver inte vara systemutvecklare, men du förstår sambandet mellan verksamhetens processer, informationsflöden och systemstöd och kan fungera som en tydlig kravställare gentemot IT och externa systemleverantörer.

Erfarenhet av digitalisering, automatisering, MES, WMS, BI-verktyg eller utveckling av KPI- och uppföljningssystem är meriterande.

Som person är du analytisk, strukturerad och lösningsorienterad. Samtidigt trivs du nära verksamheten och har ett genuint intresse för hur teknik, system och människor tillsammans kan skapa en effektiv produktion. Du har förmågan att gå från analys och data till fabriksgolvet, förstå vardagens utmaningar och tillsammans med medarbetarna omsätta idéer till fungerande lösningar.

Du är kommunikativ och pedagogisk och har lätt för att skapa förtroende på olika nivåer i organisationen. Du trivs med att driva förändring, ta initiativ och motiveras av att se konkreta resultat av ditt arbete.

Tjänsten som produktionsingenjör är placerad vid Team Tejbrants anläggning i Hultsfred, där administration, produktion, lager och design finns samlade under samma tak.

Du rapporterar direkt till platschefen och får stora möjligheter att initiera och driva förbättrings- och utvecklingsaktiviteter. Rollen är central i Team Tejbrants fortsatta utveckling som en del av Lehtovuori Group och i arbetet med att skapa en modern, effektiv och skalbar produktion.

Här erbjuds du en roll med korta beslutsvägar, stort eget ansvar och möjlighet att påverka på riktigt. Du får arbeta både strategiskt och operativt och vara med och utveckla strukturer, processer och digitala arbetssätt som kommer att prägla verksamheten under lång tid framöver.

Placering: Hultsfred

Omfattning: Heltid

Start: Enligt överenskommelse

Anställningsform: Tillsvidareanställning

Vi ser fram emot din ansökan. Urval sker löpande, skicka därför in din ansökan så snart som möjligt. För frågor om tjänsten eller rekryteringsprocessen, vänligen kontakta ansvarig rekryteringskonsult Marcus Royson via e-post, marcus.royson@eterni.se, alternativt på 0709-354044.

Som produktionsingenjör hos Team Tejbrant får du en central roll i utvecklingen av framtidens produktion. Du arbetar i gränslandet mellan produktion, teknik, inköp och IT med uppdraget att skapa effektiva, tydliga och hållbara produktionsprocesser.

Rollen kombinerar produktionsteknik, Lean, processutveckling och digitalisering. Genom att analysera produktionsflöden, utveckla arbetssätt och säkerställa att företagets digitala system stödjer verksamhetens processer bidrar du direkt till ökad produktivitet, kvalitet och leveransförmåga.

Du arbetar nära både produktionens medarbetare och företagets övriga funktioner och får stora möjligheter att påverka hur Team Tejbrants produktion utvecklas framåt.

I rollen ansvarar du för att driva och koordinera kontinuerligt förbättringsarbete inom produktionen i Hultsfred. Du analyserar produktionsflöden för att identifiera flaskhalsar, effektiviseringsmöjligheter och arbetsmoment som kan förenklas eller förbättras.

En central del av rollen är också att utveckla företagets processer och digitala arbetssätt samt säkerställa att ERP-systemet stödjer verksamhetens processer på ett effektivt sätt.

• Driva och koordinera förbättringsarbete och Kaizen-aktiviteter samt arbeta med Lean-metoder såsom 5S, värdeflödesanalys, standardiserat arbete och visuell styrning.

• Analysera produktions- och materialflöden, produktionsplanering, kapacitet och ledtider för att identifiera förbättringsmöjligheter.

• Kartlägga, dokumentera och utveckla produktions- och verksamhetsprocesser samt skapa tydliga och standardiserade arbetssätt, arbetsinstruktioner och processbeskrivningar.

• Identifiera gränssnitt mellan olika funktioner och förbättra informationsflödet genom hela verksamheten – från försäljning och order via planering, inköp, lager och produktion till leverans.

• Vara verksamhetens kontaktperson och kravställare i utvecklingen av ERP-systemet samt utveckla och standardisera arbetssätt i systemet.

• Säkerställa kvalitet i masterdata, parametrar och systemstrukturer samt identifiera manuella arbetsmoment som kan förenklas, automatiseras eller digitaliseras.

• Driva mindre system- och förbättringsprojekt och fungera som länk mellan verksamheten, interna IT-resurser och externa systemleverantörer.

• Ta fram relevanta KPI:er och utveckla datadriven uppföljning av exempelvis produktivitet, kapacitet, ledtider och leveransprecision.

Vi söker dig som har en teknisk utbildningsbakgrund, gärna som högskoleingenjör inom produktion, logistik, industriell ekonomi eller motsvarande. Alternativt har du genom flera års arbete inom tillverkande industri byggt upp motsvarande kompetens.

Du har erfarenhet av produktionsteknik, processutveckling eller kontinuerligt förbättringsarbete och en god förståelse för Lean-principer och hur dessa omsätts i praktiken.

För att lyckas i rollen behöver du också ha god systemförståelse och erfarenhet av ERP-system i en tillverkande verksamhet. Du behöver inte vara systemutvecklare, men du förstår sambandet mellan verksamhetens processer, informationsflöden och systemstöd och kan fungera som en tydlig kravställare gentemot IT och externa systemleverantörer.

Erfarenhet av digitalisering, automatisering, MES, WMS, BI-verktyg eller utveckling av KPI- och uppföljningssystem är meriterande.

Som person är du analytisk, strukturerad och lösningsorienterad. Samtidigt trivs du nära verksamheten och har ett genuint intresse för hur teknik, system och människor tillsammans kan skapa en effektiv produktion. Du har förmågan att gå från analys och data till fabriksgolvet, förstå vardagens utmaningar och tillsammans med medarbetarna omsätta idéer till fungerande lösningar.

Du är kommunikativ och pedagogisk och har lätt för att skapa förtroende på olika nivåer i organisationen. Du trivs med att driva förändring, ta initiativ och motiveras av att se konkreta resultat av ditt arbete.

Tjänsten som produktionsingenjör är placerad vid Team Tejbrants anläggning i Hultsfred, där administration, produktion, lager och design finns samlade under samma tak.

Du rapporterar direkt till platschefen och får stora möjligheter att initiera och driva förbättrings- och utvecklingsaktiviteter. Rollen är central i Team Tejbrants fortsatta utveckling som en del av Lehtovuori Group och i arbetet med att skapa en modern, effektiv och skalbar produktion.

Här erbjuds du en roll med korta beslutsvägar, stort eget ansvar och möjlighet att påverka på riktigt. Du får arbeta både strategiskt och operativt och vara med och utveckla strukturer, processer och digitala arbetssätt som kommer att prägla verksamheten under lång tid framöver.

Placering: Hultsfred

Omfattning: Heltid

Start: Enligt överenskommelse

Anställningsform: Tillsvidareanställning

Vi ser fram emot din ansökan. Urval sker löpande, skicka därför in din ansökan så snart som möjligt. För frågor om tjänsten eller rekryteringsprocessen, vänligen kontakta ansvarig rekryteringskonsult Marcus Royson via e-post, marcus.royson@eterni.se, alternativt på 0709-354044.

Som produktionsingenjör hos Team Tejbrant får du en central roll i utvecklingen av framtidens produktion. Du arbetar i gränslandet mellan produktion, teknik, inköp och IT med uppdraget att skapa effektiva, tydliga och hållbara produktionsprocesser.

Rollen kombinerar produktionsteknik, Lean, processutveckling och digitalisering. Genom att analysera produktionsflöden, utveckla arbetssätt och säkerställa att företagets digitala system stödjer verksamhetens processer bidrar du direkt till ökad produktivitet, kvalitet och leveransförmåga.

Du arbetar nära både produktionens medarbetare och företagets övriga funktioner och får stora möjligheter att påverka hur Team Tejbrants produktion utvecklas framåt.

I rollen ansvarar du för att driva och koordinera kontinuerligt förbättringsarbete inom produktionen i Hultsfred. Du analyserar produktionsflöden för att identifiera flaskhalsar, effektiviseringsmöjligheter och arbetsmoment som kan förenklas eller förbättras.

En central del av rollen är också att utveckla företagets processer och digitala arbetssätt samt säkerställa att ERP-systemet stödjer verksamhetens processer på ett effektivt sätt.

• Driva och koordinera förbättringsarbete och Kaizen-aktiviteter samt arbeta med Lean-metoder såsom 5S, värdeflödesanalys, standardiserat arbete och visuell styrning.

• Analysera produktions- och materialflöden, produktionsplanering, kapacitet och ledtider för att identifiera förbättringsmöjligheter.

• Kartlägga, dokumentera och utveckla produktions- och verksamhetsprocesser samt skapa tydliga och standardiserade arbetssätt, arbetsinstruktioner och processbeskrivningar.

• Identifiera gränssnitt mellan olika funktioner och förbättra informationsflödet genom hela verksamheten – från försäljning och order via planering, inköp, lager och produktion till leverans.

• Vara verksamhetens kontaktperson och kravställare i utvecklingen av ERP-systemet samt utveckla och standardisera arbetssätt i systemet.

• Säkerställa kvalitet i masterdata, parametrar och systemstrukturer samt identifiera manuella arbetsmoment som kan förenklas, automatiseras eller digitaliseras.

• Driva mindre system- och förbättringsprojekt och fungera som länk mellan verksamheten, interna IT-resurser och externa systemleverantörer.

• Ta fram relevanta KPI:er och utveckla datadriven uppföljning av exempelvis produktivitet, kapacitet, ledtider och leveransprecision.

Vi söker dig som har en teknisk utbildningsbakgrund, gärna som högskoleingenjör inom produktion, logistik, industriell ekonomi eller motsvarande. Alternativt har du genom flera års arbete inom tillverkande industri byggt upp motsvarande kompetens.

Du har erfarenhet av produktionsteknik, processutveckling eller kontinuerligt förbättringsarbete och en god förståelse för Lean-principer och hur dessa omsätts i praktiken.

För att lyckas i rollen behöver du också ha god systemförståelse och erfarenhet av ERP-system i en tillverkande verksamhet. Du behöver inte vara systemutvecklare, men du förstår sambandet mellan verksamhetens processer, informationsflöden och systemstöd och kan fungera som en tydlig kravställare gentemot IT och externa systemleverantörer.

Erfarenhet av digitalisering, automatisering, MES, WMS, BI-verktyg eller utveckling av KPI- och uppföljningssystem är meriterande.

Som person är du analytisk, strukturerad och lösningsorienterad. Samtidigt trivs du nära verksamheten och har ett genuint intresse för hur teknik, system och människor tillsammans kan skapa en effektiv produktion. Du har förmågan att gå från analys och data till fabriksgolvet, förstå vardagens utmaningar och tillsammans med medarbetarna omsätta idéer till fungerande lösningar.

Du är kommunikativ och pedagogisk och har lätt för att skapa förtroende på olika nivåer i organisationen. Du trivs med att driva förändring, ta initiativ och motiveras av att se konkreta resultat av ditt arbete.

Tjänsten som produktionsingenjör är placerad vid Team Tejbrants anläggning i Hultsfred, där administration, produktion, lager och design finns samlade under samma tak.

Du rapporterar direkt till platschefen och får stora möjligheter att initiera och driva förbättrings- och utvecklingsaktiviteter. Rollen är central i Team Tejbrants fortsatta utveckling som en del av Lehtovuori Group och i arbetet med att skapa en modern, effektiv och skalbar produktion.

Här erbjuds du en roll med korta beslutsvägar, stort eget ansvar och möjlighet att påverka på riktigt. Du får arbeta både strategiskt och operativt och vara med och utveckla strukturer, processer och digitala arbetssätt som kommer att prägla verksamheten under lång tid framöver.

Placering: Hultsfred

Omfattning: Heltid

Start: Enligt överenskommelse

Anställningsform: Tillsvidareanställning

Vi ser fram emot din ansökan. Urval sker löpande, skicka därför in din ansökan så snart som möjligt. För frågor om tjänsten eller rekryteringsprocessen, vänligen kontakta ansvarig rekryteringskonsult Marcus Royson via e-post, marcus.royson@eterni.se, alternativt på 0709-354044.

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.  

Job Scope

Why does the role exist? High level purpose of function.

The Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended, and what crucial spares are required.  

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards. 
• Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities. 
• Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent) 
• Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent) 
• Translate lessons learned into design and process improvements for future expansions. 
• Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives. 
• Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations. 
• Define, release, and maintain manufacturing process standards and operator training programs. 
• Train and mentor new engineers, operators and other support functions. 
• Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.  
• Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards. 
• Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required). 
• Deliver a line capable of obtaining PPAP approval, following a structured quality gate model. 
• Complete supplementary tasks as seen  fit by management to effectively utilize time and resources for the benefit of the business. 
• This role requires regular presence on the production floor.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelor’s degree in mechanical, electrical, or chemical engineering. 
• Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles. 
• Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.  
• Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper and pulp, semiconductor, electrochemical, or similar industries. 
• Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation. 
• Proficient in detailed root cause analysis, structured problem-solving methodologies and continuous improvement. 
• Familiarity with quality assurance troubleshooting tools. 
• Experience working to industry standards obtaining certification including ISO, IATF &VDA .
• Experience with statistical process control and process capability analysis. 
• Experience working with preventive maintenance strategies and Total Productive Maintenance (TPM) concepts within a production environment.
• Experience in spare part prioritisation and stock optimisation, balancing equipment availability with cost efficiency.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. 
• Knowledge of lean manufacturing principles and six sigma methodologies .
• Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments. 
• Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills. 
• Troubleshooting skills with diagnostic equipment. 
• Ability to document technical problems concisely.
• Proficient in the use of a Computerised Maintenance Management System (CMMS) for work order management, equipment data, and maintenance reporting. Experience with Microsoft Dynamics 365 is advantageous.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. 
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE. 
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.