Integro Consulting Ab

10 lediga jobb som "Elingenjör" hos "Integro Consulting AB"

Dspace HIL & SIL Developer
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast imorgon
Publicerad: 2026-06-11
Källa: Arbetsförmedlingen
Om jobbet
We are looking for a Senior HIL & SIL Engineer/Test Rig Developer with dSpace expertise.
Job Description
Are you a highly skilled HIL & SIL (MIL and VIL is also plus) Development Engineer, who is passionate about technology and innovation.
The work is done in close collaboration with SW development teams, system verification team and other functions, so you need to be skilled in working in a cross-functional and international environment.
• Verification of complex electrical systems in regards of functionality, performance and safety.
• Increasing automation of testing procedures.
• Development of test methods and test requirements.
• Developing our ways of working within climate/thermal area.
• Planning, performing, reporting and following up of verification deliverables.

Experience required:
• Hands-on experience of HIL & SIL verification and rig development.
• You should have an M.Sc. in Electrical Engineering, ESW, Electronics, Mechatronics or similar relevant education
• Experience of System Verification
• minimum 5 years of work experience in the automotive industry
• Experience from commercial vehicles is meriting
Skills required:
• Expert in dSpace tools (Automation desk, configuration desk, Control desk),
• Must be skilled in: Matlab/Simulink, C++, Python, Jira, SystemWeaver, CANalyzer, CANoe, and CAPL.
• Experience working in HIL and SIL environments with knowledge of various simulation tools
• Experience working with Grafana or other visualization tools
• Experience with linux
• Knowledge of Pytest
• A plus if you have experience from Configuring and maintaining Jenkins / Zuul and Shell scripting
Soft skills:
• Excellent communication- and collaboration skills
•Curious, and driven team player.
• Passionate about knowledge sharing
•Fluent in English both spoken and written
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Färdigheter
Python (krav)
programmeringsspråk (krav)
C++ Builder (krav)
programmeringsverktyg (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast imorgon
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se
Senior HIL Development Engineer – Automotive Embedded Systems
Arbetsgivare / Ort:Integro Consulting AB / GÖTEBORG
Omfattning / Varaktighet:Tillsvidareanställning (inkl. eventuell provanställning) / Tills vidare
Lönetyp: Fast månads- vecko- eller timlön
Ansök senast 9 augusti (30 dagar kvar)
Publicerad: 2026-07-10
Källa: Arbetsförmedlingen
Om jobbet
About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.

Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.

HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms
Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior

Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.

HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.

ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions
Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU
Experience with ADAS scenario generation and sensor simulation is highly valued.

System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.

Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.

Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.

Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.

Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus
Arbetslivserfarenhet
Elingenjör (krav)
Språk
Engelska (krav)
Svenska (meriterande)
Arbetsgivare
Integro Consulting AB
Herkulesgatan 1K
41703 GÖTEBORG
Webbplats: www.integroconsulting.se
Ansökan
Ansök senast 9 augusti (30 dagar kvar)
Ansök via mejl
work@integroconsulting.se

Visa alla 466 lediga jobb som Elingenjör

Lediga jobb som Elingenjör hos Integro Consulting AB

Om jobbet

Arbetslivserfarenhet

Färdigheter

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan

Om jobbet

Arbetslivserfarenhet

Språk

Arbetsgivare

Ansökan